RobotStudio Tutorials

Create Mechanism (3:54 min)

This tutorial shows how to create a mechanism in RobotStudio. A mechanism can be of type Robot, External Axis, Tool, Device or Conveyor. This tutorial will show you how to create a device.

Create Path from Curve (3:05 min)

This tutorial shows how you create a path from a curve in RobotStudio.

Create System from Layout (3:16 min)

This tutorial shows how you create a system from layout in RobotStudio.

Edit and Debug (7:12 min)

This tutorial shows how to edit and debug your rapid program in RobotStudio.

Set Task Frame (1:32 min)

In this tutorial you learn how to reposition your system in a station bu using "Set task frame".

Station Signals and Event Manager (3:40 min)

In this tutorial you learn how to use the station signals and event manager in RobotStudio.

Collision Controll (2:47 min)

In this tutorial you will learn how to use Collision Sets to verify that your robot path is collision free.

Reachability (2:52 min)

This tutorial shows how to place a fixture and workpiece, and verify that all targets are reachable for the robot.

Pack and Go (1:23 min)

To simplify the collaboration with your colleagues, this tutorial shows how to pack a station with all belonging data, into one file.

Unpack and Work ( 2:25min)

This tutorial shows how you open a station from a Unpack and Work file.

Create Conveyor Mechanism(01:57)

This tutorial shows how to create a mechanism of the type Conveyor.

Setup and Program a Station with Conveyor Tracking (10:15min)

This tutorial shows how to configure a system for conveyor tracking, how to setup a station with a robot and conveyor, and how to create a program with conveyor tracking in RobotStudio.

Smart Component - Create In Feeder (5:25 min)

This tutorial shows how to create a Smart Component which generates a part, moves the part linearly on a conveyor, and then stop the part when it reach a sensor.

Smart Component - Create Out Pallet (3:04 min)

This tutorial shows how to create a Smart Component which delete a part after a specified time. The part to be deleted is defined in the tutorial "Smart Component - Setup Simulation".

Smart Component - Create Tool (5:21 min)

This tutorial shows how to create a Smart Component with a vacuum gripper that can attach and detach parts.

Smart Component - Setup Simulation (5:12 min)

This tutorial shows how to setup a station simulation which use the Smart Components of the tutorials "Smart Component - Create In Feeder", "Smart Component - Create Out Pallet" and "Smart Component - CreateTool".

RobotStudio Tutorials - ScreenMaker